Find a Drayton stockist near you
Documents
Installation Guides
Specifications
- Part number
- RF562DR
- Energy Class
- IV = 2% (Acc. EU 811/2013, 812/2013, 813/2013, 814/2013)
- Relevant EC directives
- 2014/53/EU Radio Equipment Directive 2006/66/EC Batteries Directive 2011/65/EU RoHS Directive
- Applied standards
- EN60730-1; EN60730-2-7; EN60730-2-9 EN 300 220-2; EN 301 489-3
- Setting range
- 5°C to 30°C
- Control accuracy
- LP20RF receiver: 5°C to 30°C<br>Digistat+RF thermostat: + 0.5°C @ 20°C
- Timing resolution
- 1 minute
- Temperature resolution
- 1°C
- Hot water and/or central heating programs
- 7 days
- Hot water pre-heat settings
- LP20RF receiver: 3 ON / 3 OFF per day<br>Digistat+RF thermostat: N/A
- Central heating settings
- LP20RF receiver: 3 ON / 3 OFF per day<br>Digistat+RF thermostat: N/A
- Radio frequency
- 433 MHz
- Radio signal range
- 30m typically. The range may be affected by the compostion / density and number of walls between the thermostat and receiver
- Ball pressure test
- 90°C
- Pollution degree
- 2
- Power supply
- LP20RF receiver: 24Vd.c. less than 65mA<br>Digistat+RF thermostat: 2xAA 1.5V alkaline batteries
- Battery life
- Digistat+RF thermostat: approx. 2 years
- Battery backup time & date
- min. 10 years
- Mounting
- LP20RF receiver: Boiler mounted<br>Digistat+RF thermostat: Suitable for surface mounting
- Ambient operating temperature
- 0°C to 50°C
- Ambient storage temperature
- –20ºC to 55ºC
- Ambient operating humidity
- LP20RF receiver: 30 - 95% (non-condensing up to 45°C)<br>Digistat+RF thermostat: 25 - 90% (non condensing up to 45°C)
- Software Class
- A
- Wiring
- No wiring required
- Class of operation
- LP20RF receiver: II<br>Digistat+RF: N/A
- Class of protection of housing
- LP20RF receiver: IP24<br>Digistat+RF: IP30
Related Products
Digistat+ RF
