Wiring Diagrams
Probably the highest number of requests Drayton's technical team receives every week is for help with wiring diagrams using the LWC1 or LWC3 wiring centre.
Each installation is different, depending on the configuration and the controls used, so to try and help as much as possible, the tech team has created 24 diagrams, covering the most popular layouts. These are all available below as individual PDF files and can be viewed on screen or downloaded to your computer and printed out for use later.
If you have any comments or ideas for information that would help you do the job easier then just email us.
-
BIFLO with LWC1 and Pump Over Run
(925.41 KB)
-
BIFLO with LWC1
(891.59 KB)
-
BIFLO with LWC1 to a Digistat mains version
(910.83 KB)
-
BIFLO with LWC1 to a Digistat Battery Version
(934.02 KB)
-
BIFLO with LWC1 to an SCR receiver
(920.6 KB)
-
BIFLO with LWC3 to an SCR Receiver
(914.67 KB)
-
BIFLO with LWC3 to an Un-Vented Mains Pressure Cylinder
(1006.93 KB)
-
BIFLO with LWC3 to a Digistat Battery Version
(984.99 KB)
-
BIFLO with LWC3 to a Digistat Mains Version
(969 KB)
-
BIFLO with LWC3 and Pump Over Run Boiler
(967.87 KB)
-
BIFLO with LWC3
(939.64 KB)
-
Twin Zone with LWC3 and 2 stage Frost protection
(1.05 MB)
-
Twin Zone with LWC3 showing RF CH & HW Controls
(1.07 MB)
-
Twin Zone with LWC3 to an SCR Receiver
(1.04 MB)
-
Twin Zone with LWC3 to a Digistat Battery Version
(1.03 MB)
-
Twin Zone with LWC3 to a Digistat Mains Version
(1.05 MB)
-
Twin Zone with LWC3 and Pump Overrun Boiler
(1.02 MB)
-
Twin Zone with LWC3
(1.01 MB)
-
Twin Zone with LWC1 to an SCR Receiver
(1.03 MB)
-
Twin Zone with LWC3 to an Un-Vented Mains Pressure Cylinder
(1.05 MB)
-
Twin Zone with LWC1 to a Digistat Battery Version
(1.05 MB)
-
Twin Zone with LWC1 to a Digistat Mains Version
(1.03 MB)
-
Twin Zone With LWC1 and Pump Overrun Boiler
(1.17 MB)
-
Twin Zone with LWC1
(1009.15 KB)